As HCT-800S SMT Pick & Place Machine that equipped with 8 heads as well as a new flying vision system, the HCT-800S realizes a chip mounting speed of 20,000 CPH. In addition, it is applicable to 0402 chips to the largest mm ICs by default and increases actual productivity and placement quality by applying a smart nozzle checking and replacing system.
• Vision On the Fly Alignment.
• Bottom Vision Alignment System for big components/IC.
• Fiducial recognition and coordinate correction.
• Conveyor system with SMEMA interface and automatic-width-control.
• Magnetic levitation linear motor in X and Y axis for high repeatability and stability
• Smart Nozzle System provides automatic nozzle checking and replacing.
• Perfect for medium & high volume production.
• Strong and rigid mechanical design.
• Optimized pick / place routing design, ensures precision end speed.
• Each mounting head has its own Z – direction servo motor, which is designed for vertical motion.
• Works with different types of high-precision nozzle.
• For different PCB , FPC, MCPCB, PSB, etc.
• Suit for variety of SMD components: resistors, capacitors, IC, QFP, CFP, etc.
• Using imported high precision ball screw, motor, solenoid valve, cable, etc., effectively improve the placement accuracy, stability.
Technical Parameters :
|Number of Heads||Vision on the Fly||8|
|Placement Rate||Under the optimum condition||20000CPH|
|Feeder Capacity||Front and Back||64 Tape Feeders (8mm)|
|IC Tray Capacity||325 x 135mm||
|Component Sizes||Handled by Head Camera||
Smallest: 0201 (inch)
Largest: 10 x 8 (mm)
|Handled by Fixed Bottom Camera||
Smallest: 1206 (inch)
Largest: 25 x 25 (mm)
Magnetic Levitation Linear Motor
0 to 360°
|X-Y Repeatability||Magnetic Grid||
300 x 250mm
50 x 50mm
AC 220V ±10% (50/60Hz, 1 phase)
|External Dimension(mm)||L x W x H||
1150 x 1370 x 1500 mm